Dual boot windows 8 and mac os on pc

Jul 5, I want to dual boot Mac OS X and windows 8 on my PC. I already have windows 8 installed. My question is can I install Mac OS X on the same.
Table of contents



Simply watch this video if you want to follow what I did to solve: How I set 2nd hard drive is my laptop. Check out the video or article guide: Hi , I am using a laptop with i7 u and hd graphic. When trying to boot in the os, it shows OsxAptioFixDry …….. By the way, i try both. Is there anything else I can do. Sorry for my poor english. Hi, thanks for the complete guide.. Is it possible to do this without having to format the disk?

I have windows 7 already, with lots of programs and stuff. Video guide: Watch the Video tutorial: I learned this the hard way — have to format the entire disk to GPT. After that, just follow Faiz instructions and it will be OK. Thanks for sharing your feedback dear, Yes to install and complete post-installation then you need a GPT partition map Scheme. Especially if you want to install Clover bootloader, then you must have GPT partition map. Can you give me the kext for my laptop Specs: Hey, Check this article and you may find the right kext for your system.

Well i did check that article and managed to fix almost every problems. Hey dear, When you install your audio kext by mulitBeast then restart your System and while coming back from the restart on the clover screen boot with Caches GUIDE into your macOS and you will have sound. Is it on single hard disk or Separate? Thanks for the quick reply, I follow the instruction and managed to install mac quite OK only problem is no Audio, everything else is OK.

However, I tried to follow the dual boot with Windows in this article but when Windows copied files and restart, I just see the clover bootloader, and can not boot to the Windows partition to finish the installation. Hey dear, How did you do to run normal boot? You could give me the configuration of your bios, flags of the boot. You could give me the configuration of your bios, bootflags. What do you mean TheDezkill? Yes boot from the usb but only in UEFI mode. The guide here is good, you should follow it step by step 2. I format that USB again and follow this article: So I have to back up my docs, files, and other stuff in my old Windows.

I can only fully support the Intel HD graphics, touchpad, ethernet. Just installation. Then you help me with the drivers. Faiz could u please provide me a full step by step tutorial for my hardware or device? Thank you. Hi, I wanna ask whether it needs to be done in legacy or uefi while installing mac os Sierra with pre installed windows Tnx dear for replying.

Le and then nothing happens. What to do? Thank you in advance as I know you are going to help. Hey dear, Give a try to another config. If you have installed As legacy then you can clean your hard disk and install both. I choose language but when I select continue it turns around and reload the same page. By the way, update the Sierra installer to latest version And thanks for all the hard work. Your hd plist is incorrect. For Sierra you have to apply this patch:. All the Plist file are created by an another Hackintosh group.

After I boot from usb in clover, it is a black screen that is stuck with: Create bootable USB for your system on Windows by using the guide below. But before doing this stuff, make sure that your system is compatible with macOS Sierra. I have Intel graphics Which config. Also should i change my boot args in clover? You can see in the screenshot I have linked. It says Intel HD Graphics https: Hi, I have both intel and nvidia GeForce m in my laptop.

Error after choosing usb from clover Panic cpu 0 caller 0xffffffdd6: If no then check here: Direct windows opening. What can I do? Search google or wait we will have a Video tutorial soon for that on our youtube channel: Hi Thanks for your tutorial, i have successfully installed macossierra by following your tutorial in my hp laptop which already running windows 7. And also please tell me how to install ethernet , wifi and activate touch. Hello dear, In this step, you need a post Installation. Hi there.. Could you please suggest any solution? Thanks for the reply.. I successfully booted into HFS and completed the installation..

Then I tried to install the drivers using multibeast.. I think I chose the wrong drivers for my system.. If I tell you my laptop specs, could you guide me how to select the appropriate drivers from multibeast? Thanks again. Hi, I have a laptop with pre installed win Now i want install sierra Can i do it with this tutorial?

Yeah, You can install macSO Sierra. Then follow the video. Do I have to do something with my SSD first? I already set my bios correctly, if anyone could help please let me know screenshot below. You have to create new Bootable USB by this way: I though that it for windows 10… I am currently running win7 and i want to dual boot sierra and windows 7. If i have to do that bootable usb like in your link, where do i get that stuff to put in the usb so i need 3 usb total? Seems like you missed the Note Note: Please read the article carefully you will get all important point.

I already make the bootable USB installer of sierra with that link you gave me but how do I put the cloover in the same usb since you saying copied to the same USB. Secondly, as you can after the process finished with win32diskimager then it formatted the USB to fat32 and it can be easily accessed.


  • descargar american mcgees alice para mac.
  • Hackintosh Dual Boot Windows 10 and macOS High Sierra (Same Drive);
  • Featured Images.
  • How Dual-Booting Works.

Watch the video tutorial if you wish: You can boot with boot flags also and you have to place your config. It has MBR table. Sorry for my english mistakes. Are you User that saying the same comment that you point out? Any ideas? For more info visit the article below.

pure-dressage.com/includes/merge-avi-files-free-mac.php

How to Dual Boot Windows 10 and macOS Sierra on PC - Hackintosh

But it seems maybe I should have done Windows first? How do I solve that? Notify me of follow-up comments by email. Notify me of new posts by email. This site uses Akismet to reduce spam. Learn how your comment data is processed. Mac OS. Change Boot Mode. Exit Save Changes. Boot into USB Installer. Open Disk Utility. Go to Erase Tab. Partitioning the Disk. Erase Process Successful. Go to Partition Tab.

Windows Partition. Confirm Partition. Done Partition Windows HD. Setup the Installation of macOS Sierra. Accept the Terms of the Software License Agreement. Install Mac OS. Boot From Mac HD. Choose Language. Create a Computer Account. Setting up macOS Sierra.

Select your Language and other. Install Windows. Enter Product Key or Skip. License Terms. Select Installation Type. Where to Install Windows. Installing Windows. Enter the Product Key. Get Connected. Get Going Fast. Setting Things up For you. Windows 10 Installed. Share Share. Prev Article. Next Article. Faiz Orz. No dear, it is not possible. Sandra W.

Why Bother Dual-Booting?

Thank You for your great article. You are welcome, my dear. Detailed steps on installation with pics in every steps. Thank You man. Mukhtar Jafari.

How to Dual Boot Windows 10 and macOS Sierra on PC

Krzysztof Waliszewski. If I install MacOs, will I need to format my whole hard disk? Okay but what if I just format a partition? Install macos from usb External drive in clove setting my screen goes black. Yeah, You can use it for compatible laptop as well. Thanks a lot again. If I already have a partition with windows on it, do I need to redo a windows installation? Yeah, you can update to the latest version. Hitender singh. Thanks for your quick response. I am using Nvidia graphic card. Arun Vishwanath. Did you change your config. I have installed Windows How can i install mac os… please help.

Sunny Bongiri. Is it for 32 bit or 64 bit…I am asking this because I have 32 bit system…. If your system supports 64 bit it will be better. Check your system compatibility with macOS on tonymacx Pinal vaghela. Samuel Glushkin. Aayush Jaiswal. Tnx for any help. Chrismarc Jobel Rom. Because you have done something wrong while creating bootable usb. Create bootable usb correctly You might have done something wrong. Darren Summers. Hi Faiz, Thank you for a great article however I have run into an issue which I hope you can provide a solution for.

How To Install (Dual Boot) Windows + Mac Os (High Sierra) On Laptop Or PC --Dual Booting

Can you please let me know what could be the issue. Thanks Harshil Patel. Adam Li. But I finally got the Hackintosh working, then I installed Windows, and bang, black screen, I tried again with your guide of reinstalling the Nvidia Web drivers, and all come back. Really happy now bc I have both macOS and Windows running stable. Thank you very much! Thanks for the guide! However, I keep running into a snag. I formatted the windows partition as ex-fat and attempted to install, but once I do the installer prompts me to restart the install again….

Any ideas? Even if you add the partition the windows installer will refuse to use it. If you delete it and create a new ntfs one during install it will fail too. Is there some other way to get the clover bootloader to take precedence over Windows bootloader? Thank you. FYI when erasing HD. Thanks for all your guides!!! I have just try to understand , what you have written. Above method seems to have issues when dual booting. Try following the below method.

I can see Windows Option on Clover, but when I click on it, it shows me Windows Screen, loading circle and reboots the laptop. Thank you… now i can dual boot windows and mac os with single hardisk. But for some steps I took quite different methods. And for making dual boot system, I try follow steps to rename bootmgwf. Are you able to email me your whole method please? Appreciate any response. Notify of new replies to this comment. Sort by: Andrew Le. Louis Alvaro. Agustin Zenuto. Justin Vella.

Greg Germain. Alex Patrick. Hi Sir , I have just try to understand , what you have written. Kayo Cordeiro.